Chassis for All FOI Series, 9 Slot 3U
The RMC-3101 provides up to nine available slots for any fiber optic isolator or telephone disconnect unit. The tenth available slot must be occupied by a PSM-3010 power supply module. Each RMC-3101 will be shipped with one PSM-3010. A second PSM-3010 may also be added for power redundancy, leaving eight available slots for any fiber optic isolator. If the first PSM-3010 fails, the second PSM-3010 will take over the entire load and carry on normally. A cable bay is provided below the module bay for cable routing and enhanced air fl ow through two rear exhaust fans and a vented front panel.
An RMC-3102 is identical to the RMC-3101 with the addition of an optical patch bay mounted on the rear.
Each fiber optic isolator must also be accompanied by a CMA-3002 chassis mount adapter, which slides the fi ber optic isolator into the slot and assures correct alignment of the isolator power connector to the power bus inside the RMC-3101.
FiberPlex recommends the RMC-3101R for TEMPEST or other high security applications.
- 3U Chassis holds up to 9 FOI isolators
- Power redundancy is available with a second power module (only 8 FOIs fit with redundant power)
- Each FOI isolator is easily accessable through a removable front panel
- Enhanced cooling via tow rear mounted exhaust fans
|Speed||Max Air Pressure||Air Flow||Noise|
|2500 RPM||3.5 mmH2O||0.14 InchH2O||50.5 CFM||1.43 m3/min||34dBA @ 1M|
|5.25 in (133mm)||19 in (483 mm)||12.75 (234 mm)||22 lb (10 kg)|
|SPECIFICATIONS – PSM-3010|
|Power Supply||Input Voltage||85||–||250||VAC|
|Case Dimensions||PSM-3010||9.559 in (243 mm)||1.57 in (40 mm)||3.468 in (88 mm)||1.6 lb (0.7 kg)|