RT-HEMCE

Industrial 10/100BaseT(X) to 100BaseFX Media converters
The RT-HEMCE industrial Ethernet media converters are designed to provide reliable and robust 10/100BaseT(X) to 100BaseFX media conversion in harsh industrial environment. The RT-HEMCE’s intensified design guarantees the uninterrupted operations of your industrial automation allocations.RT-HEMCE series of media converters are equipped with exceptional DIP switch features where LFP, store-and-forward, auto-negotiation, etc, are all available for selection (Please refer to the below table) .

All RT-HEMCE models are subject to a 100% burn-in test, and are available for models that support a standard operating temperature range from -10 C to 60 C , and an extended operating temperature range from -40 C to 85 C .


  • 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X, DIP switch setting
  • Link Fault Pass-through (LFP)
  • -40C to 85 C operating temperature range (W models)
  • Redundant dual power input
  • Designed for hazardous locations (Class 1 Div. 2/ Zone 2)
  • Broadcast Storm Control (optional)
Technology
Network Standards IEEE 802.3 10Base-T
IEEE802.3u 100BaseT(X) and 100BaseFX
IEEE802.3x Flow Control
Interface
RJ45 Port Connectors Auto-negotiation10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, 5 types of shielded or unshielded wires, Transmission distance is less than or equal to 100m.
Fiber Port Connectors 100Base FX, single mode or multi-mode SC, ST and LC interface, Transmission distance is optional
LED Indicators Power, Port Status, 10/100M
Output Warning Relay, Standard 2 Pin, 0.5A@24VDC
Optical Fiber
Mode Typical Dist Wavelength Cable Size TX Power Rx Sensitivity Transmission speed
Single 15km 1310nm 9/125um -15~-8dBm < -35dBm 10/100Mbps
Multi 2km 1310nm 62.5/125um -23.5~-14dBm < -35dBm 10/100Mbps
Toggle Switch
Serial No. 1 2 3 4 5 6
Function LEP Enabled Select Forward-mode Auto-negotiation Enabled Select RJ45 interface rate RJ45 full duplex mode Optical duplex mode
On Enable LFP Forward Directly Close 10Mbps Half duplex Half duplex
Off Close LFP Store and Forward Enable 100Mbps Full duplex Full duplex
Power Requirements
Low Voltage Range 12~36VDC @ 3.5W MAX
10~24VAC @ 3.5VA MAX
Connection Standard 4 Pin Dual Power Connector
Physical Characteristics
Case Slim Metal Case, IP30 Design
Dimensions 25×100×75mm
Installation DIN Rail or Panel Mounting
Environment Limits
Operating Temperature Standard Models: -10 to 60 C
Wide Temp Models: -40 to 85 C
Storage Temperature -40 to 85 C
Ambient Relative Humidity 10 to 95%(Non-condensing)
Standards and Certifications
EMI FCC Part15, CISPR(EN55022) Class A
EMS EN61000-4-2(ESD) Level 3
EN61000-4-3(RS) Level 3
EN61000-4-4(EFT) Level 3
EN61000-4-5(Surge) Level 3
EN61000-4-6(CS) Level 3
EN61000-6-2 UL Class 1, Division 2, Groups A, B, C, and D (pending)
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
Warranty
Warranty Period 5 years

Part Number Description
RT-HEMCE-SC-24VDC Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC fiber connector, 24VDC Power Input, -10 to 60°C
RT-HEMCE-SC-24VDC-W Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, SC fiber connector, 24VDC Power Input, -40 to 85°C
RT-HEMCE-SSC-24VDC Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC fiber connector, 24VDC Power Input, -10 to 60°C
RT-HEMCE-SSC-24VDC-W Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, SC fiber connector, 24VDC Power Input, -40 to 85°C
RT-HEMCE-LC-24VDC Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, LC fiber connector, 24VDC Power Input, -10 to 60°C
RT-HEMCE-LC-24VDC-W Industrial 10/100BaseT(X) to 100BaseFX media converter, multi mode, LC fiber connector, 24VDC Power Input, -40 to 85°C
RT-HEMCE-SLC-24VDC Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, LC fiber connector, 24VDC Power Input, -10 to 60°C
RT-HEMCE-SLC-24VDC-W Industrial 10/100BaseT(X) to 100BaseFX media converter, single mode, LC fiber connector, 24VDC Power Input, -40 to 85°C

REFERENCES